Motor installed

| No TrackBacks



The motor got installed 12/30/2002. Thanks to both guys who gave me a hand...couldn't have done it without you. Pretty much went in by the book but getting it mated with the transmission input shaft was a bear. We did have to remove the muffler to get enough vertical clearance; possible the slight variation in where I welded in my replacement engine tin had something to do with it but it fits well and bolted up fine.
IMG_0782.jpg

IMG_0783.jpg

No TrackBacks

TrackBack URL: http://www.brown-house.net/MT/mt-tb.cgi/187